Expert Answers about Chevrolet P Series

• Install Photo of Timbren Front Suspension Enhancement System TGMFP30W
• I have attached for you below a photo from the instructions of the Timbren Front Suspension Enhancement System part # TGMFP30W. I have also attached for you below the install instructions so you can see the whole process yourself. Unfortunately, we do not have any install videos at this time.
  view full answer...


• Where Does the Bare Copper Wire Go on the Furrion Chill HE RV Air Conditioner System
• The bare copper wire with clear tube on the control box of the distribution for the Furrion Chill HE RV Air Conditioner System part # FR92PR is an air temp sensor. It needs to be pointed straight up toward the overhead unit. It does not correct directly to any other wires or devices.
  view full answer...


• Replacing 2 Wire Marker Lights With Single Wire Marker Lights
• On lights similar to the Optronics LED Trailer Clearance and Side Marker Light # MCL44AB1 that will only have 1 wire pigtail this is the positive power wire. The light requires mounting to a grounded metal surface that will provide you the ground connection. If you are not able to attach it to a grounded metal surface you can also use a jumper Wire # DW02359-1 with a Ring Terminal # DW05737-1 to attach to your existing wiring or a nearby grounded surface. There are some lights similar...
  view full answer...


• Do The 7500 Air Lift Springs Fit the Same Mounting Brackets as the 5000 Springs?
• I have an answer for you. Unfortunately, I confirmed with Air Lift that the Replacement Air Spring for Air Lift LoadLifter 7500 XL System # AL50236 has different mounting brackets than the 5000 models. In order to have the correct brackets as well as an even plane for your vehicle, it is recommended that you have the same size springs on both axels. For this route, I recommend the Air Lift LoadLifter 7500 XL Air Helper Springs - Rear Axle # AL57589. Without the same size springs on both...
  view full answer...